Dual mode device: depending on the uploaded firmware it can operate as a fix serial-Ethernet converter or a Basic programmable controller. Every serial device can easily be made ethernet accessible by using a DS1101. It provides a cost-effective, easy to develop alternative compared to embedded Linux systems.
Dual mode device: depending on the uploaded firmware it can operate as a fix serial-Ethernet converter or a Basic programmable controller. Every serial device can easily be made ethernet accessible by using a DS1101. It provides a cost-effective, easy to develop alternative compared to embedded Linux systems.
Superior upgrade to the DS1206 device.
Based on the high-performance T1000 IC.
10/100BaseT, auto-MDIX Ethernet port.
Optional 802.11b/g Wi-Fi interface.
Optional 96x32 monochrome OLED display.
Optional power-over-Ethernet.
1024KB flash for firmware, application, and data.
2KB EEPROM for data storage.
Eight LEDs:
Green and red main status LEDs;
Yellow Ethernet link LED;
Five blue LEDs (can be used for Wi-Fi signal
strength indication).
Built-in buzzer.
3.5-channel RS232 port on DB9M connector:
TX, RX, RTS, CTS, DTR, DSR, DCD lines;
Baudrates of up to 921,600 bps;
None/even/odd/mark/space parity modes;
7/8 bits/character modes;
Optional RTS/CTS flow control;
Flexible mapping with 15 different options, such as:
1 channel: RX, TX, CTS, RTS, DSR, and DTR;
3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and
RX4 lines.
Programmable “12V” power output on pin 9 of DB9.
Pin 9 can also be used for “12V” power input.
Power: 12VDC nominal (min. 9V, max. 18V).
Software-controlled onboard PLL.
Dimensions: 90x48x25mm.
Operating temperature range: -5 ~ 70 C.
Firmware is upgradeable through the serial port or
network.
Included accessories:
DIN rail mounting plate
Wall mounting plate and two screws
| EAN-code | 2437452600669 |
|---|---|
| Manufacturer | Tibbo |
| Power Supply | N/A |
| Color | Black |
Log In